The power supply unit PARC 100-120L is designed to operate as part of a pulsed electric arc source of carbon plasma with initiation of a vacuum arc discharge by a laser pulse. The power source is used to charge an energy storage unit with a capacity of 2 000 μF to a preset charging voltage and synchronize the operation of one solid-state laser for initiating an arc discharge.

Specifications

The maximum value of the capacitive energy storage device charge voltage with device electrical capacity of 2The maximum value of the capacitive energy storage device charge voltage with device electrical capacity of 2 000.0 uF and the frequency of the charge / impulse discharge cycles of 120 Hz	≥ 320 V
Setting range of capacitive storage charge voltage	100 - 320 V
The maximum charging current of the capacitive storage	115 A
Maximum repetition rate of charge / pulse discharge cycles	120 Hz
The discreteness of setting the cycle repetition frequency	5 Hz
Number of synchronization channels for laser radiation sources	1 piece
Type of synchronization signal	discrete, decoupled optical channel. Load capacity is consistent with the Buyer
The discharge pulse counter capacity	999 999
Indication and control	- touchscreen display on the front panel of the power supply - serial port RS-485 - protocol ModBus RTU
Switching on lock	isolated digital input 24 VDC
Parameters of the supply network	3Ph + N + PE, 380/400 VAC, 50/60 Hz
The maximum power consumed from the mains	45 kW
Operating conditions	uncontaminated atmosphere of a dry production or laboratory room with a maximum ambient temperature of 35 °C and a humidity of not more than 75 %
The time of continuous operation of the power source under normal operating conditions	at least 12 hours
Cooling	combined: - air, air intake from the front panel, reset from the rear panel - liquid, not less than 1 l/min at a liquid temperature not higher than 20 °C, the supply and drain connections are located on the back panel of the power supply
Dimensions	7U, depth 495 mm
Weight	≤ 50 kg